Single Patient Kits and Archwire Packs

For indirect bonding, visit AOA lab's website or call 800.262.5221.
To order single patient kits and packs of archwires, contact your Ormco representative or call 800.854.1741.


Single Patient Kit

Single Patient Kit Part Number
Single Patient Kit, Upper/Lower 7-7 740-0430

Archwires—Packs of 10

Initial Leveling Part Number
.013 CuNiTi: for severe crowding
Straight Wire CuNiTi .013 Dia Sm Pk10 204-2101
Straight Wire CuNiTi .013 Dia Med Pk10 204-2102
Straight Wire CuNiTi .013 Dia Lg Pk10 204-2103
.014 CuNiTi: for moderate crowding
Straight Wire CuNiTi .014 Dia Sm Pk10 204-2131
Straight Wire CuNiTi .014 Dia Med Pk10 204-2132
Straight Wire CuNiTi .014 Dia Lg Pk10 204-2133
Completing Leveling and Rotational Control Part Number
.016 CuNiTi
Straight Wire CuNiTi .016 Dia Sm Pk10 204-2111
Straight Wire CuNiTi .016 Dia Med Pk10 204-2112
Straight Wire CuNiTi .016 Dia Lg Pk10 204-2113
.016 x .016 CuNiTi
Straight Wire CuNiTi .016 X .016 Sm Pk10 204-2121
Straight Wire CuNiTi .016 X .016 Med Pk10 204-2122
Straight Wire CuNiTi .016 X .016 Lg Pk10 204-2123
Torque and Arch Form Control Part Number
.018 x .018 CuNiTi
Straight Wire CuNiTi .018 X .018 Sm Pk10 204-2141
Straight Wire CuNiTi .018 X .018 Med Pk10 204-2142
Straight Wire CuNiTi .018 X .018 Lg Pk10 204-2143
Finishing or Detailing Part Number
.0175 x .0175 TMA
Straight Wire TMA .0175 X .0175 Sm Pk10 204-2211
Straight Wire TMA .0175 X .0175 Med Pk10 204-2212
Straight Wire TMA .0175 X .0175 Lg Pk10 204-2213
.016 x .016 SS
Straight Wire SST .016 X .016 Sm Pk10 204-2321
Straight Wire SST .016 X .016 Med Pk10 204-2322
Straight Wire SST .016 X .016 Lg Pk10 204-2323
Space Closure for Extraction Cases Part Number
.017 x .017 SST
Straight Wire SST .017 X .017 Sm Pk10 204-2331
Straight Wire SST .017 X .017 Med Pk10 204-2332
Straight Wire SST .017 X .017 Lg Pk10 204-2333
.018 x .018 SST
Straight Wire SST .018 X .018 Sm Pk10 204-2301
Straight Wire SST .018 X .018 Med Pk10 204-2302
Straight Wire SST .018 X .018 Lg Pk10 204-2303
Instruments Part Number
Slim Weingart Plier 803-0601
Lingual Hinge-cap Opener 802-1001

AOA Lab

All Inclusive Patient Kits with Indirect Bonding Setup

AOA Lab can prepare your ALIAS patient set up for easy and convenient indirect bonding (IDB). Bracket placement accuracy is optimized with our C.L.A.S.S system which follows your RX, and incorporates a custom composite base, which ensures the bracket base perfectly matches each tooth’s anatomy. Our experienced technicians use the Straight Wire template and the highest quality adhesive products to prepare the tray for placement in your office on bonding day.

  • Decrease bonding time and improve bracket placement1
  • Full 7X7 U/L available
  • Full assortment of ALIAS brackets and wires on hand at AOA
  • Soft tray holds brackets with a rigid outer tray to ensure stability and easy placement

AOA Lab

AOA Lab

AOA Lab

AOA Lab

Indirect Bonding Quick Guide

  1. Prep patient as normal
  2. Prep bracket bases in IDB tray with Enlight LV (or similar)
  3. Etch, Rinse, Dry teeth
  4. Apply Ortho Solo (or similar) to enamel
  5. Cure if desired, following manufacturer’s adhesive recommendation
  6. Place tray and cure each bracket per manufacturer’s instructions (rec. 10 sec)
  7. Remove tray, cure each bracket again (rec. 10 sec)

Current AOA Customers

  • Download the Lingual Straight Wire prescription form at aoaaccess.com/downloads.
  • Physical models:
    • Send the Rx form, and PVS impression to AOA Lab.
  • Digital models:
    • When sending an impression from an approved scan file, ensure patient’s name and scanner type is included on the Rx. Then simply submit your prescription form following the protocol of your scanner.

For indirect bonding, visit AOA lab's website or call 800.262.5221.
To order single patient kits and packs of archwires, contact your Ormco representative or call 800.854.1741.


1John. H. Hickham, D. M. (1993). Predictable Indirect Bonding. Journal of Clinical Orthodontics, 215-218.